![Heat gun](https://www.skileurope.com/static/version1721890767/frontend/Door4/skil/en_GB/Magento_Catalog/images/product/placeholder/.jpg)
- 2000 Watt
- 'Constant heat control'
- 70 - 600°C temperature range
8003 FD
Heat gun
Product Description
The SKIL 8003 is a powerful 2000W heat gun and is ideal for a wide range of jobs like stripping and drying paint, applying heat-shrink tubes and shaping plastics. This heat gun has three combined temperature and airflow settings, allowing you to match the setting to the task at hand. The constant heat control mechanism prevents the tool from overheating. This heat gun is compatible with the most commonly available heat gun nozzles on the market, so you can always find the right nozzle for the job. This heat gun is supplied in a sturdy case with four nozzles.
The heat gun has a constant heat control mechanism that allows continuous working without fear of overheating if the air outlet is obstructed. This mechanism controls the maximum temperature by switching off the main heating element if the tool overheats, while the fan keeps working to cool the motor down. The heating element then automatically switches on again when normal temperature is reached, so you can continue with your job.
This powerful 2000W heat gun has three combined temperature and airflow settings that allow you to select exactly the right temperature for every job. The highest setting is ideal for soldering or defrosting water pipes, and can also be used to remove paint. The lower settings are ideal for drying paint and shaping plastics.
This heat gun has a wide base that allows you to place the tool in a stable position on a workbench for stationary use. In this case you can safely hold your workpiece with both hands, which is especially handy for bending pipes. The heat gun has a 2,75 metre power cord that ensures optimum working freedom. This heat gun is supplied in a sturdy case with a glass protection nozzle, a flat nozzle and a reflector nozzle, as well as a reduction nozzle which is ideal for stripping and drying paint, shaping plastics and soldering.
Specifications
Technical
Cord length | 2.75m |
---|---|
Voltage/frequency | 220-240V/50-60Hz |
Input wattage | 2000W |
Airflow setting 2 | 350/550l/min |
Temperature range | 70°C/450°C/600°C°C |
Electronics | Yes |